Dispersion Primer with a wide range of applications, forinterior and exterior use, providing overlayment compoundDL10 or DL59 is applied within drying time of primer. Notto be left exposed to the elements for more than 2 hours.
Dispersion primer low emission, film forming primer foruse over non absorbent surfaces including non-watersoluble adhesive residues. The product cannot be dllutedwith water and for interior and exterior use, providingoverlayment compound DL10 or DL59 is applied withindrying time of primer. Not to be left exposed to theelements for morethan 2 hours.
Dispersion primer low emission, film forming primer foruse over non absorbent surfaces including non-watersoluble adhesive residues. The product cannot be dllutedwith water and for interior and exterior use, providingoverlayment compound DL10 or DL59 is applied withindrying time of primer. Not to be left exposed to theelements for morethan 2 hours.
Dispersion primer low emission, film forming primer for useover nonabsorbent surfaces including non-water solubleadhesive residues. The product can be diluted with waterand for interior and exterior use, providing overlaymentcompound is applied within drying time of primer.
DL10 is an advanced cement and polymer based levelling compound with special aggregate.DL10 is formulated with high flow performance for leveling work on installation of thick layers. DL10 is very suitable for quicksetting preparation solutions and also can be used as a fast set screed with low ratio water mixing.
DL33 is an advanced cement and polymer based levelling and smoothing compound. DL33 is formulated for levelling work on standard construction in universal areas. DL33 is suitable for internal use on new or existing substrates for high traffic areas that are used internally as a underlayment.
DL55 is an advanced cement and polymer based levelling and smoothing compound.DL55 is formulated for experienced commercial contractors to smooth and level large commercial and retail areas. Once dry it is suitable for the application of vinyl, carpet and tile floor finishes. Unlike normal hydration levellers, DL55 will harden and dry at temperatures down to 10°C.
DL59 is a cement based leveling compound with very high compressive strength to C45. DL59 is especially suitable for high traffic, heavy wear location. DL59 can be also used as overlays for polished.
DL59 Flex is a Fiber-Reinforced cementitious self-levelingsmoothing compound with enhanced flexural strength. It resistscracking and provides an exceptionally smooth, hard surfacefor use on timber substrate in residential and commercial areas.
DL59 BI TURBO is a highly polymer-modified, fast-settingself-leveling compound that will accept floor covering inappro-ximately 60 minutes. It is sufficiently dry for installationof most floor coverings as soon it is set to walk on, allowingfor complete renovations in a single day.
Cemimax Bicomax is a Bi-Components high performanceself levelling compound with low odour, fast setting,fastdrying, speclal designed for wet areas, high moisturevapor contral subfloor, exterior and suitable for preparingsound internalsubfloors prior to the installation of newfloorcoveringsBicomax is particularly suitable for use over old adhesiveresidues (including bitumen and carpet tlle tackifiers)without the need for priming. Bicomax can be used forbatch filling timber floors prior to overlaying with plywood.It is suitable for use in clinical and biologically sensitiveareas such ashospitals, laboratories,cleanrooms etc.Bicomax mied with set of Liquld component can beapplled to suitably prepared steel decks in light tomedium-duty traffic areas.
Bicomax is unaffected by molsture and is suitable forapplication over damp,clean, uneven concrete andsand/cement screeds, prior to application of Cemimaxwaterproof surface membranes or direct application.Bicomax is also suitable for use over a wide range ofother subfloor types including Cemimax waterproofsurface membranes,sand/cement screed, concrete.granollthic, terrazzo, asphalt, steel, old vinyl asbestostiles, epoxy and polyurethane resins, ceramic and quarrytiles.
PP4 is an advanced cement and polymer based patchingcompound for repair, filling and patching up to 13mm depth.Can be used on a variety of substrates prior to installation ofmost flooring products. Primng is not required for most applcations.
Low slump and rapid strength cementitious repairmortar for patching, repair and filling of holes.Suitable for subfloor preparation to levelling andinstallation work. It provides a high strength andsmooth surface for covering.
Cemimax Cemi Screed is a ready-to-use, eco-friendly,norma-setting and rapid-drying engineered screed.